MCP servercom.perfboarddesigner/mcp

Changes a project kept here, by a list of ops applied in order: add_part, update_part (move, turn, change value or ref), remove_parts, add_wire (from/to, or a `path` of holes made

Which pins the board connects: every net with its name (from its pins, e.g. GND), its pins ("U1.8 VCC" for a chip's pin, "D1.K" or "C1.+" for a polarized lead, "R1.1" otherwise) an

Everything needed to place parts: for each, which project file list it goes in, its pins (offsets from pin 1 at rotation 0) and pin labels, polarity, value unit, holes its body cov

Where every placed part's pins land, as [column, row] holes, with pin numbers and labels (e.g. U1 pin 8 VCC), after rotation, plus holes a part's body covers. Use it to route wires

The whole project file of a project kept here, as the editor would save it (version 3), one entry per line.

Lists the parts a project can place. Without a query: every part, grouped by category, as its id with its name and pin count; call it this way once to see what there is. With a que

Turns a project into a link that opens it in Perfboard Designer: the project travels inside the link, so it works without any server. Give the link to the user. Also returns `image

Starts a project kept here under a projectId: a blank board, or one of the example projects (perfboard://examples/...) to copy from. Returns the projectId and the project file. The

Reads the project out of a Perfboard Designer share link (any of its forms: z=, json= or src=, which is downloaded; a stored project's short link too), so you can look at or change

Draws the board as text, one cell per hole with column and row numbers: each part's pins by a key letter and pin number (a1, a2...), holes under a part's body, wire ends, the holes

Shows the user a picture of the board right in the conversation, as the editor draws it, with a button that opens it in Perfboard Designer. Only in clients that show MCP Apps (e.g.

Checks a project file and lists every problem with where it is: entries the editor would leave out, unknown parts, pins off the board, two parts' pins or leads in one hole, overlap