MCP serverapp.divekit/mcp

Use this when the diver asks what gas to breathe at a depth or which deco gases to carry: returns the richest bottom mix within a PPO₂ limit (default 1.4 bar) and an END limit (def

Returns the settings for continuous-flow blending through a compressor intake: each feed gas's share of the intake flow, the analyzer readings to aim for after the first injection

Returns a weighting check for one rig: how much lead to add or remove to be neutral at the end of the dive, the net buoyancy at the start (full cylinders at the target depth) and t

Use this when the diver asks how long they can stay at a depth without decompression stops (no-deco limit, NDL, no-stop time). Returns the minutes left after the descent at GF high

Converts one diving figure between units: pressure (bar, psi, MPa), volume (L, ft³), depth (m, ft), temperature (°C, °F, K), weight (kg, lb) and breathing rate (L/min, ft³/min, bar

Returns what happens when two cylinders are joined with a transfill whip: the pressure both settle to, each cylinder's pressure and mix afterwards, and how much gas moved. With a t

Finds the longest whole-minute bottom time on one level of an open-circuit plan: the longest that keeps every cylinder at or above its reserve (limit reserve), whose time to surfac

Returns the facts for one breathing gas: maximum operating depth (MOD) at its Dive Kit PPO₂ band cap and at 1.4 bar, minimum depth for hypoxic mixes and, at a depth, PPO₂, equivale

Returns the gas one open-circuit cylinder spends over a planned profile: per segment the gas used (volume and pressure), what is left, the runtime and a status, plus the reserve, t

Returns one section of the Dive Kit planning guide as markdown. Use this when you need to explain a term, a warning or deco theory, or to check what a planning conversation needs:

Returns diving certifications from Dive Kit's vetted open dataset of agencies and courses: prerequisites, equivalent courses at other agencies, depth and gas limits, notes and link

Returns scuba cylinders from Dive Kit's vetted open cylinder dataset: water volume, rated capacity, working pressure, material, typical use and, for five or fewer matches, weight,

Returns vetted references from Dive Kit's open references dataset, with links. Use this when a diver asks for a source. Call it before answering any question about deco theory, phy

Returns the mix and pressure a cylinder ends with after gases are added in order: each addition's pressure and mix before and after, the cooling step, and the final O₂ %, He % and

Returns a partial-pressure blending plan from what a cylinder holds to a target mix and pressure: bleed, helium, oxygen and top-up steps with the gauge pressure to stop at, the mix

Computes the decompression plan for one dive, open circuit (OC) or closed-circuit rebreather (CCR): stop table, runtime, time to surface (TTS), gas used per cylinder, ascent pressu

Decodes a Dive Kit share link (https://divekit.app/share/deco-plan/...) into the plan_dive input it carries: profile, gases, CCR rig, settings, custom contingencies, modifiers and

Returns a diver's breathing rate measured from a logged dive: RMV (surface litres a minute, what plan_dive and gas_usage take) and SAC (pressure drop a minute on that cylinder), ov