Endpoints: 76,849MCP servers: 32,725Payout addresses: 3,825Paid calls: 6,132Letters: 84Defects: 3,888counted 1 min ago
teppi

Server definition

Hash
sha256:d736a1a9843e01f50f410aa8485cdbcc09d28fa9d62c29b25f9acc0eb3f6e36b
What it is
What a remote MCP server returned when asked what it offers: 12 tools

The blob, as servednamed by its sha256

{ "instructions": "step2gcode turns STEP, DXF and SVG files into machine-ready G-code for CNC milling and laser cutting.\n\nFIRST decide how the file gets in - this decides whether the user waits seconds or minutes.\n a) Shell available? Try this FIRST, it costs you nothing to output and takes about a second:\n curl -sS -X POST https://www.step2gcode.com/api/upload -F \"file=@/path/to/model.step\"\n The JSON answer contains the file_id. Use it and skip the upload tools entirely.\n b) Did that fail with a proxy, tunnel or 403 error? Then your sandbox blocks outbound connections. Fall back to: (xz -9e -c model.step 2>/dev/null || gzip -9c model.step) | base64 | tr -d '\\n' and pass the output to upload_file_content. You have to write those characters out yourself, so compressing is what keeps it near twenty seconds instead of three minutes.\n c) No shell at all? create_upload_link - the user drops the file in a browser in five seconds. Never type a CAD file out by hand.\n\nThen, four calls and no polling:\n 1. the file_id from whichever route worked\n 2. generate_gcode - waits for the result and returns dimensions and hole diameters. If it reports the job is still running, call get_job_status every ~15 s until it is done. NEVER call generate_gcode a second time for the same part: the first job keeps running, and a second one only adds load. The generator stops by itself after 180 s and then reports why.\n 3. preview_toolpath - show the image to the user\n 4. get_download_link - ask first, it spends a credit\nDo not call create_upload_link in that case; it exists for assistants without a shell, which then need check_upload as well.\n\nOnly the download costs a credit, and only for a model that has not been paid for yet. Always remind the user to verify tool paths, depths, feed rates and clearances before running the program on a machine. THIS CONNECTION IS IN TRIAL MODE - it carries no credits. Everything works: upload, generation, status and the tool path image preview. Only get_download_link will refuse, because the G-code itself is the paid part. Run the whole flow for the user anyway and show the preview. Then, with the preview in front of them, offer them credits - that is the moment the trial is built for, not an afterthought once the download is refused. This connection has no access token of its own. Get the user one first: GET https://www.step2gcode.com/api/mcp/trial returns a personal key with setup lines for every client, no account. Credits are then bought at https://www.step2gcode.com/?mcp=<that key> and land on it - a trial key may appear in this conversation. A key bought on the website instead stays out of it: recommend that the user enters it in the client themselves; only if they prefer may they paste it here for you to set up, and then it is part of the chat history. Connect the key as the header X-Api-Token: <key> on https://www.step2gcode.com/api/mcp wherever the client allows headers (Claude Code, Cursor, VS Code, Gemini CLI). Chat apps that only take a URL (claude.ai, ChatGPT) use https://www.step2gcode.com/api/mcp/<key>. One credit covers one model permanently, including later versions of it.", "tools": [ { "description": "Check whether the user finished the browser upload. Returns the file_id once ready. Free.\n\nNEXT STEP - do not generate yet. Ask the user:\n1. Which material? Offer the presets (wood, hardwood, plywood, acrylic, aluminum, steel, brass). If theirs is not among them, pick the closest preset AND set spindle_speed, feed_rate, plunge_rate and step_down yourself from known cutting data for that material and cutter.\n2. Which cutter diameters do they actually own? Recommend one from that list: it must fit the smallest inner radius of the part, and a smaller cutter means longer machining time. If you cannot judge the geometry yet, say so and suggest generating once to see the dimensions.\n3. Is the part cut all the way through? Then recommend holding_tabs so it does not come loose on the last pass.", "inputSchema": { "properties": { "upload_id": { "type": "string" } }, "required": [ "upload_id" ], "type": "object" }, "name": "check_upload", "outputSchema": null }, { "description": "Turn an uploaded STL or 3MF mesh back into a STEP solid with exact surfaces - planes, cylinders, cones and fillets instead of triangles, intersected into real edges. Free; only the download of the finished file is charged.\n\nUse this when the user has a mesh and needs CAD geometry: a hole becomes a cylinder with a diameter again, a chamfer a cone with an angle, so the part can be dimensioned, modified and machined. Typical case: the CAD source is gone and the mesh is all that is left.\n\nThe answer states the largest measured deviation between the built solid and the mesh, in millimetres - always pass that number on to the user, it is what tells them whether the result is accurate enough for their part. Parts made of freeform surfaces and raw 3D scans are rejected with a reason instead of being badly reconstructed.\n\nUpload the mesh the same way as any other file (curl to /api/upload, upload_file_content or create_upload_link), then pass the file_id here. The resulting STEP file can go straight into generate_gcode afterwards.", "inputSchema": { "properties": { "file_id": { "description": "file_id of an uploaded .stl or .3mf mesh", "type": "string" } }, "required": [ "file_id" ], "type": "object" }, "name": "convert_mesh_to_step", "outputSchema": null }, { "description": "Create a short-lived link the user opens in their browser to upload a CAD file (STEP, DXF or SVG). Returns the link and an upload_id. Poll check_upload with the upload_id until it reports a file_id, then call generate_gcode. Free.\n\nBefore using this, check whether you can run shell commands. If you can, do not send the user to the browser: compress the file locally and pass it to upload_file_content (the compression is detected by itself). That works inside sandboxes without network access, which is the common case - a direct curl upload fails there with a proxy error. The response of this tool spells out all three routes in order.", "inputSchema": { "properties": {}, "type": "object" }, "name": "create_upload_link", "outputSchema": null }, { "description": "Read the full text of one page found with search, by its id. Free.", "inputSchema": { "properties": { "id": { "description": "The id from a search result", "type": "string" } }, "required": [ "id" ], "type": "object" }, "name": "fetch", "outputSchema": { "properties": { "id": { "type": "string" }, "text": { "type": "string" }, "title": { "type": "string" }, "url": { "type": "string" } }, "required": [ "id", "title", "text", "url" ], "type": "object" } }, { "description": "Start G-code generation for an uploaded file and wait for the result. Most jobs finish within the wait, so the answer usually already carries the part dimensions and hole diameters - no polling needed. Only if it says the job is still running, call get_job_status once after a few seconds. Free - only the download is charged.\n\nBEFORE CALLING THIS, ask the user about the settings you cannot infer from the file. Two of them change the result substantially and are wrong by default more often than not:\n- material: drives spindle speed, feed rates and depth per pass. Aluminium cut with wood settings breaks cutters.\n- holding_tabs: without them a cut-out part comes loose on the last pass and can be thrown off the machine. Recommend them for any part cut all the way through.\nAlso worth asking when the geometry suggests it: pockets and holes (STEP files carry that depth information), and whether the job is milling or laser work.\n\nIMAGES (PNG, JPG, WebP ...) are always laser raster engraving. Ask for the engraving width in mm, photo or logo (image_mode), the controller (GRBL or Marlin) and its S maximum (laser_max_s), and tell the user to test power and speed on a scrap piece first.", "inputSchema": { "properties": { "bit_diameter": { "description": "Cutter diameter in mm, e.g. 6. Leave it out and step2gcode picks the largest whole millimetre that still fits through the smallest hole in the part.", "type": "number" }, "controller": { "description": "Laser G-code dialect. GRBL (default) or Marlin (3D printers with a laser module, MPCNC/LowRider and other Marlin machines).", "enum": [ "grbl", "marlin" ], "type": "string" }, "depth": { "description": "Cutting depth in mm; omit to take it from the model geometry (STEP)", "type": "number" }, "feed_rate": { "description": "Horizontal feed in mm/min. Same rule: only for materials outside the presets.", "type": "number" }, "file_id": { "description": "file_id from check_upload or upload_file_content", "type": "string" }, "holding_tabs": { "description": "Leave small bridges so a part cut all the way through stays in the stock. Strongly recommended for through cuts.", "type": "boolean" }, "holes": { "description": "Drill or mill the holes found in the geometry", "type": "boolean" }, "image_mode": { "description": "Images only. Line by line (raster): dither for photos (default), threshold for logos and text, grayscale for power per dot. Along lines (vector, much faster): outline traces the edges of dark areas, centerline follows the middle of strokes (line art, handwriting), edges turns a photo into a line drawing.", "enum": [ "dither", "threshold", "grayscale", "outline", "centerline", "edges" ], "type": "string" }, "image_width_mm": { "description": "Images only: engraving width in mm; the height follows from the aspect ratio. Default 100.", "type": "number" }, "inner_contours": { "description": "Cut inner contours and cut-outs", "type": "boolean" }, "laser": { "description": "Laser job instead of milling", "type": "boolean" }, "laser_max_s": { "description": "Highest S value of the machine: $30 on GRBL (usually 1000), 255 on most Marlin machines. Ask the user - a wrong value burns at the wrong power.", "type": "number" }, "laser_power": { "description": "Laser power in % (laser jobs). For images the default is 30 %.", "type": "number" }, "laser_speed": { "description": "Laser speed in mm/min (laser jobs). For images the default is 2000.", "type": "number" }, "material": { "description": "Workpiece material. Sets spindle speed, feed rates and depth per pass. Ask the user - the default assumes softwood.", "enum": [ "wood", "hardwood", "plywood", "acrylic", "aluminum", "steel", "brass" ], "type": "string" }, "origin_xy": { "description": "Workpiece origin in XY. Default TL.", "enum": [ "TL", "TR", "BL", "BR", "C" ], "type": "string" }, "origin_z": { "description": "Z zero on the stock surface (top) or on the spoilboard. Default top.", "enum": [ "top", "spoilboard" ], "type": "string" }, "plunge_rate": { "description": "Plunge feed in mm/min, for materials outside the presets.", "type": "number" }, "pockets": { "description": "Mill pockets found in the geometry (STEP)", "type": "boolean" }, "ramp_entry": { "description": "Enter the material on a ramp instead of plunging straight down", "type": "boolean" }, "spindle_speed": { "description": "Spindle speed in rpm. Only set this when the material is not covered by the presets - otherwise the preset value is used.", "type": "number" }, "step_down": { "description": "Depth per pass in mm. Rule of thumb: up to 1x cutter diameter in softwood, far less in metal.", "type": "number" } }, "required": [ "file_id" ], "type": "object" }, "name": "generate_gcode", "outputSchema": null }, { "description": "Show credits left on the access token and how many models are already paid for. Free.", "inputSchema": { "properties": {}, "type": "object" }, "name": "get_credit_balance", "outputSchema": null }, { "description": "Return the download link for the finished G-code. THIS is the billed step: one credit per model not paid for yet. Re-downloading the same job or a model already paid for is free.\n\nCalled without confirm, this tool charges nothing and only reports what the download would cost. Show that to the user, wait for their answer, and only then call again with confirm=true. Never set confirm=true on your own initiative - it spends the user's money.", "inputSchema": { "properties": { "confirm": { "description": "Set to true only after the user has explicitly agreed to spend the credit.", "type": "boolean" }, "job_id": { "type": "string" } }, "required": [ "job_id" ], "type": "object" }, "name": "get_download_link", "outputSchema": null }, { "description": "Check a generation job. While it runs you get the percentage done, how long it has been running and how much time is left before the generator gives up on its own (180 s). When it fails you get the generator's own reason - pass that on to the user instead of retrying blindly. This is the ONLY correct way to wait for a job; calling generate_gcode again never helps. Free.", "inputSchema": { "properties": { "job_id": { "type": "string" } }, "required": [ "job_id" ], "type": "object" }, "name": "get_job_status", "outputSchema": null }, { "description": "Return the download link for a STEP file built by convert_mesh_to_step. THIS is the billed step: one credit per model not paid for yet. The DXF contour that comes with a 2.5D part belongs to the same part and costs nothing extra.\n\nCalled without confirm, this tool charges nothing and only reports what the download would cost. Show that to the user, wait for their answer, and only then call again with confirm=true. Never set confirm=true on your own initiative - it spends the user's money.", "inputSchema": { "properties": { "confirm": { "description": "Set to true only after the user has explicitly agreed to spend the credit.", "type": "boolean" }, "step_id": { "description": "step_id from convert_mesh_to_step", "type": "string" } }, "required": [ "step_id" ], "type": "object" }, "name": "get_step_download_link", "outputSchema": null }, { "description": "Show the finished tool path as an image (top view and isometric view, cutting moves and rapids in different colours) so the user can sanity-check the job before paying. Free.", "inputSchema": { "properties": { "job_id": { "type": "string" } }, "required": [ "job_id" ], "type": "object" }, "name": "preview_toolpath", "outputSchema": null }, { "description": "Search step2gcode's help and knowledge base: supported files (STEP, DXF, SVG, STL, images, Gerber), machines and post-processors, settings, laser, 3D milling, pricing and credits. Returns pages with id, title and url; read one with fetch. Free, no file needed.", "inputSchema": { "properties": { "query": { "description": "What to look for, e.g. 'DXF holes smaller than the cutter'", "type": "string" } }, "required": [ "query" ], "type": "object" }, "name": "search", "outputSchema": { "properties": { "results": { "items": { "properties": { "id": { "type": "string" }, "title": { "type": "string" }, "url": { "type": "string" } }, "required": [ "id", "title", "url" ], "type": "object" }, "type": "array" } }, "required": [ "results" ], "type": "object" } }, { "description": "Upload a CAD file by writing its content out yourself. Use this only when a direct curl upload to /api/upload is not possible - that route costs you no output at all. If you must use this tool, ALWAYS compress first and pass the output as content:\n (xz -9e -c model.step 2>/dev/null || gzip -9c model.step) | base64 | tr -d '\\n'\nxz writes about a quarter less than gzip; the command falls back to gzip where xz is missing (macOS). xz, bzip2 and gzip are recognised by themselves - no extra argument.\n\nDo not paste the raw file. You have to write out every character you pass here, and a typical STEP solid takes you three minutes raw against twenty seconds compressed - the user watches that happen. Compression shrinks it about fivefold, which brings files up to roughly 80 KB within reach.\n\nNO SHELL AVAILABLE? Then do not use this tool for anything above about 10 KB - you would have to type the whole file out and the user waits minutes for it. Call create_upload_link instead: the user drops the file in a browser and it is done in five seconds. Same if the file is still too large after compressing. Free.\n\nNEXT STEP - do not generate yet. Ask the user:\n1. Which material? Offer the presets (wood, hardwood, plywood, acrylic, aluminum, steel, brass). If theirs is not among them, pick the closest preset AND set spindle_speed, feed_rate, plunge_rate and step_down yourself from known cutting data for that material and cutter.\n2. Which cutter diameters do they actually own? Recommend one from that list: it must fit the smallest inner radius of the part, and a smaller cutter means longer machining time. If you cannot judge the geometry yet, say so and suggest generating once to see the dimensions.\n3. Is the part cut all the way through? Then recommend holding_tabs so it does not come loose on the last pass.", "inputSchema": { "properties": { "content": { "description": "Output of: (xz -9e -c model.step 2>/dev/null || gzip -9c model.step) | base64 | tr -d '\\n' - the compressed file, base64 encoded (xz, bzip2 or gzip, detected by itself).", "type": "string" }, "filename": { "description": "File name including extension, e.g. bracket.step", "type": "string" } }, "required": [ "filename", "content" ], "type": "object" }, "name": "upload_file_content", "outputSchema": null } ] }
Verify it yourselfcurl -s https://api.teppi.xyz/v1/evidence/sha256:d736a1a9843e01f50f410aa8485cdbcc09d28fa9d62c29b25f9acc0eb3f6e36b | sha256sum