Endpoints: 76,849MCP servers: 32,730Payout addresses: 3,825Paid calls: 6,155Letters: 84Defects: 3,893counted 2 min ago
teppi

Server definition

Hash
sha256:0b398d3f3ddbf309ba95c39125872050be076820b6f272f16efdeff6c3667e77
What it is
What a remote MCP server returned when asked what it offers: 11 tools

The blob, as servednamed by its sha256

{ "instructions": "Scientific-molding study calculators. Each tool takes measurements an engineer recorded at an injection-molding press and returns the study result, an interpretation, any data-quality warnings, and a link that opens the study on the Lab website with the data loaded.\n\nCall get_study_protocol before asking anyone for numbers, so the data that comes back is the data the calculation needs. Call plan_process_development to work out which study to run next — the studies are a sequence, and each one fixes a setpoint the next holds constant.\n\nEvery number comes from the data supplied. Do not compute these results yourself, and do not present a tool result as a claim about any particular supplier.\n\nNothing sent to these tools is stored.", "tools": [ { "description": "Quantify cavity-to-cavity fill imbalance from short-shot weights. Give two or more replicate shots at a fill level and the result also says whether the variation comes from the cavities (runner and gate geometry) or from shot-to-shot process drift — the two have opposite fixes. Judge balance on a short shot at 90% fill or above.", "inputSchema": { "$schema": "https://json-schema.org/draft/2020-12/schema", "properties": { "context": { "properties": { "material": { "maxLength": 64, "type": "string" }, "meltTempC": { "type": "number" }, "moldTempC": { "type": "number" } }, "type": "object" }, "levels": { "description": "One entry per fill percentage tested — e.g. a 50%, then a 95%, short shot.", "items": { "properties": { "fillPct": { "description": "Short-shot fill percentage, e.g. 95", "type": "number" }, "shots": { "description": "One entry per shot, mapping cavity name to part weight in grams", "items": { "additionalProperties": { "type": "number" }, "propertyNames": { "maxLength": 8, "minLength": 1, "type": "string" }, "type": "object" }, "maxItems": 100, "minItems": 1, "type": "array" } }, "required": [ "fillPct", "shots" ], "type": "object" }, "maxItems": 100, "minItems": 1, "type": "array" }, "study_code": { "description": "A study as the Lab card encodes it; use instead of the measurements (levels)", "maxLength": 8000, "minLength": 1, "type": "string" } }, "type": "object" }, "name": "cavity_balance", "outputSchema": null }, { "description": "Find the shortest cooling time at which a dimension has stopped changing, and the cycle seconds that come off. Supply the drawing tolerance and the rule tightens to a tenth of it. Measure each part at a consistent interval after ejection — the part keeps moving.", "inputSchema": { "$schema": "https://json-schema.org/draft/2020-12/schema", "properties": { "context": { "properties": { "material": { "maxLength": 64, "type": "string" }, "meltTempC": { "type": "number" }, "moldTempC": { "type": "number" } }, "type": "object" }, "dimensionName": { "maxLength": 48, "type": "string" }, "dimensionTolerance": { "description": "Total drawing tolerance, same units as dimension", "type": "number" }, "points": { "items": { "properties": { "coolingTime": { "description": "Cooling time, seconds", "type": "number" }, "dimension": { "description": "Measured dimension, consistent units", "type": "number" } }, "required": [ "coolingTime", "dimension" ], "type": "object" }, "maxItems": 100, "minItems": 2, "type": "array" }, "study_code": { "description": "A study as the Lab card encodes it; use instead of the measurements (points, dimensionName, dimensionTolerance)", "maxLength": 8000, "minLength": 1, "type": "string" } }, "type": "object" }, "name": "cooling_time", "outputSchema": null }, { "description": "Map which combinations of two process parameters produce a cosmetically acceptable part, and how much room surrounds the centre. Sweep wider than you expect the window to be: a passing point on the edge of the range tested means the window was never closed on that side. Axes and their units: hold_pressure (psi), melt_temp (°C), mold_temp (°C), injection_velocity (in/s), hold_time (s), cooling_time (s). Defects: short, flash, sink, burn, splay, weld-line, drag, warp.", "inputSchema": { "$schema": "https://json-schema.org/draft/2020-12/schema", "properties": { "context": { "properties": { "material": { "maxLength": 64, "type": "string" }, "meltTempC": { "type": "number" }, "moldTempC": { "type": "number" } }, "type": "object" }, "points": { "items": { "properties": { "defect": { "enum": [ "short", "flash", "sink", "burn", "splay", "weld-line", "drag", "warp" ], "type": "string" }, "pass": { "description": "Did the part meet the cosmetic criteria?", "type": "boolean" }, "x": { "description": "Value on the x axis, in the unit of whichever axis xAxis selects", "type": "number" }, "y": { "description": "Value on the y axis, in the unit of whichever axis yAxis selects", "type": "number" } }, "required": [ "x", "y", "pass" ], "type": "object" }, "maxItems": 100, "minItems": 2, "type": "array" }, "study_code": { "description": "A study as the Lab card encodes it; use instead of the measurements (xAxis, yAxis, points)", "maxLength": 8000, "minLength": 1, "type": "string" }, "xAxis": { "description": "Horizontal parameter. Units by axis: hold_pressure (psi), melt_temp (°C), mold_temp (°C), injection_velocity (in/s), hold_time (s), cooling_time (s).", "enum": [ "hold_pressure", "melt_temp", "mold_temp", "injection_velocity", "hold_time", "cooling_time" ], "type": "string" }, "yAxis": { "description": "Vertical parameter. Units by axis: hold_pressure (psi), melt_temp (°C), mold_temp (°C), injection_velocity (in/s), hold_time (s), cooling_time (s).", "enum": [ "hold_pressure", "melt_temp", "mold_temp", "injection_velocity", "hold_time", "cooling_time" ], "type": "string" } }, "type": "object" }, "name": "cosmetic_window", "outputSchema": null }, { "description": "Rate a measurement system from a crossed study: every operator measures every part, the same number of times. Two-way ANOVA per the AIAG Measurement Systems Analysis manual (4th ed.), matching Minitab's crossed gage R&R defaults: the operator × part interaction is pooled into repeatability when not significant (α = 0.05). Reports %GRR of study variation and, when a tolerance is given, of the tolerance, the repeatability / reproducibility split, the number of distinct categories, and the AIAG band (under 10% acceptable, 10–30% conditional, over 30% unacceptable). The standard study is 10 parts, 3 operators, 2–3 trials. Run it before trusting a Cpk.", "inputSchema": { "$schema": "https://json-schema.org/draft/2020-12/schema", "properties": { "context": { "properties": { "material": { "maxLength": 64, "type": "string" }, "meltTempC": { "type": "number" }, "moldTempC": { "type": "number" } }, "type": "object" }, "operators": { "items": { "properties": { "name": { "description": "Operator label, e.g. \"A\". For your own bookkeeping; the calculation and the readout identify operators by position.", "maxLength": 16, "type": "string" }, "trials": { "description": "One array per trial, each listing this operator's readings for parts 1…N in the same part order, in the dimension's own units", "items": { "items": { "type": "number" }, "maxItems": 30, "minItems": 2, "type": "array" }, "maxItems": 6, "minItems": 2, "type": "array" } }, "required": [ "trials" ], "type": "object" }, "maxItems": 6, "minItems": 2, "type": "array" }, "study_code": { "description": "A study as the Lab card encodes it; use instead of the measurements (operators, tolerance)", "maxLength": 8000, "minLength": 1, "type": "string" }, "tolerance": { "description": "Tolerance width (upper limit minus lower limit), same units as the readings. Enables %GRR of tolerance, which is what a Cpk study needs.", "exclusiveMinimum": 0, "type": "number" } }, "type": "object" }, "name": "gage_rr", "outputSchema": null }, { "description": "Find the hold time at which the gate freezes and part weight stops rising. Seal is the first of three consecutive weights within 0.1% of each other; the recommended production hold time adds a margin of one increment. A weight that falls back after seal means the gate did not stay frozen. Run at the velocity the viscosity curve selected.", "inputSchema": { "$schema": "https://json-schema.org/draft/2020-12/schema", "properties": { "context": { "properties": { "material": { "maxLength": 64, "type": "string" }, "meltTempC": { "type": "number" }, "moldTempC": { "type": "number" } }, "type": "object" }, "points": { "items": { "properties": { "cushionPosition": { "description": "Cushion, mm", "type": "number" }, "holdTime": { "description": "Hold time, seconds", "type": "number" }, "keyDimension": { "description": "A key dimension measured on the same parts, mm or inches — use whichever the drawing calls out, consistently across all points", "type": "number" }, "partWeight": { "description": "Average part weight, grams", "type": "number" } }, "required": [ "holdTime", "partWeight" ], "type": "object" }, "maxItems": 100, "minItems": 2, "type": "array" }, "study_code": { "description": "A study as the Lab card encodes it; use instead of the measurements (points)", "maxLength": 8000, "minLength": 1, "type": "string" } }, "type": "object" }, "name": "gate_seal", "outputSchema": null }, { "description": "Return the full procedure for one study: what it is for, the equipment needed, the step-by-step method at the press, and what a good result looks like, so the numbers collected at the press are the ones the calculation needs.", "inputSchema": { "$schema": "https://json-schema.org/draft/2020-12/schema", "properties": { "study": { "description": "Which study to explain", "enum": [ "viscosity_curve", "cavity_balance", "pressure_drop", "cosmetic_window", "gate_seal", "cooling_time", "gage_rr", "process_capability" ], "type": "string" } }, "required": [ "study" ], "type": "object" }, "name": "get_study_protocol", "outputSchema": null }, { "description": "Open an empty data sheet for one study in an interactive card: the procedure beside a table the person fills in or pastes into, with the result computed as they type. Also returns the procedure as text and a link to the same calculator on the Lab website.", "inputSchema": { "$schema": "https://json-schema.org/draft/2020-12/schema", "properties": { "setpoints": { "additionalProperties": false, "description": "Setpoints fixed so far, shown above the sheet", "properties": { "coolingTime": { "type": "number" }, "holdTime": { "type": "number" }, "injectionVelocity": { "type": "number" }, "meltTemp": { "type": "number" }, "packPressure": { "type": "number" } }, "type": "object" }, "study": { "description": "Which study", "enum": [ "viscosity_curve", "cavity_balance", "pressure_drop", "cosmetic_window", "gate_seal", "cooling_time", "gage_rr", "process_capability" ], "type": "string" } }, "required": [ "study" ], "type": "object" }, "name": "open_study_sheet", "outputSchema": null }, { "description": "Given the studies already run, return the full development sequence with each one marked done or outstanding, what each fixes, what it depends on, and which study to run next. The order matters: each study fixes a setpoint the next one holds constant, so running them out of order produces numbers that do not transfer.", "inputSchema": { "$schema": "https://json-schema.org/draft/2020-12/schema", "properties": { "completed": { "default": [], "description": "Studies already run", "items": { "enum": [ "viscosity_curve", "cavity_balance", "pressure_drop", "cosmetic_window", "gate_seal", "cooling_time", "gage_rr", "process_capability" ], "type": "string" }, "maxItems": 8, "type": "array" }, "setpoints": { "additionalProperties": false, "description": "Setpoints fixed so far, from each study result", "properties": { "coolingTime": { "type": "number" }, "holdTime": { "type": "number" }, "injectionVelocity": { "type": "number" }, "meltTemp": { "type": "number" }, "packPressure": { "type": "number" } }, "type": "object" } }, "type": "object" }, "name": "plan_process_development", "outputSchema": null }, { "description": "Find where injection pressure is consumed along the flow path. Each reading is the CUMULATIVE peak pressure needed to fill through that section — an air shot gives the nozzle figure, then sprue, runner, gate and the full part — so the values ascend. Known sections: Nozzle, Sprue, Runner, Gate, Part. Run every reading at the velocity the viscosity curve selected.", "inputSchema": { "$schema": "https://json-schema.org/draft/2020-12/schema", "properties": { "context": { "properties": { "material": { "maxLength": 64, "type": "string" }, "meltTempC": { "type": "number" }, "moldTempC": { "type": "number" } }, "type": "object" }, "intensificationRatio": { "description": "Hydraulic-to-plastic multiplier; omit if pressure is already plastic", "type": "number" }, "machineMaxPressure": { "description": "Machine maximum injection pressure, same units as pressure", "type": "number" }, "stages": { "items": { "properties": { "pressure": { "description": "Cumulative peak pressure to fill through this section, psi", "type": "number" }, "stage": { "description": "Section name, e.g. one of: Nozzle, Sprue, Runner, Gate, Part", "maxLength": 24, "type": "string" } }, "required": [ "stage", "pressure" ], "type": "object" }, "maxItems": 100, "minItems": 2, "type": "array" }, "study_code": { "description": "A study as the Lab card encodes it; use instead of the measurements (stages, machineMaxPressure, intensificationRatio)", "maxLength": 8000, "minLength": 1, "type": "string" } }, "type": "object" }, "name": "pressure_drop", "outputSchema": null }, { "description": "Judge whether a running process can hold a dimension inside its tolerance. Reports Cp and Cpk from within-subgroup sigma and Pp and Ppk from overall sigma — the second pair is what a customer's SPC package computes from the same measurements — each with a 95% confidence interval, an upper bound on parts per million out of spec, and an Anderson–Darling normality check. Estimators follow Minitab's defaults. No verdict is given when the data cannot support one (no limit, zero spread, badly non-normal data). One specification limit is enough. Sample at least 25 consecutive parts without adjusting the process.", "inputSchema": { "$schema": "https://json-schema.org/draft/2020-12/schema", "properties": { "lsl": { "description": "Lower specification limit", "type": "number" }, "samples": { "description": "Measurements in production order", "items": { "type": "number" }, "maxItems": 100, "minItems": 2, "type": "array" }, "study_code": { "description": "A study as the Lab card encodes it; use instead of the measurements (samples, usl, lsl, target, subgroupSize, withinMethod)", "maxLength": 8000, "minLength": 1, "type": "string" }, "subgroupSize": { "description": "Consecutive measurements per rational subgroup. Omit or 1 for individuals (within sigma from the moving range).", "maximum": 100, "minimum": 1, "type": "integer" }, "target": { "description": "Nominal from the drawing. Used only to sanity-check it against usl/lsl (a warning when it falls outside them) — not carried into the share link, since the snapshot has no field for it.", "type": "number" }, "usl": { "description": "Upper specification limit", "type": "number" }, "withinMethod": { "description": "Within-sigma estimator when subgroupSize > 1: pooled standard deviation (default, as Minitab) or R-bar/d2.", "enum": [ "pooled", "rbar" ], "type": "string" } }, "type": "object" }, "name": "process_capability", "outputSchema": null }, { "description": "Find the optimal injection velocity from a velocity / peak-pressure sweep. Computes relative viscosity (plastic pressure times fill time) against relative shear rate, locates the shear-thinning plateau, and picks a velocity from the middle of it. Record a fill time on every point for a result that transfers between machines. This is the first study in the sequence; every later study holds its velocity constant.", "inputSchema": { "$schema": "https://json-schema.org/draft/2020-12/schema", "properties": { "context": { "properties": { "material": { "maxLength": 64, "type": "string" }, "meltTempC": { "type": "number" }, "moldTempC": { "type": "number" } }, "type": "object" }, "intensificationRatio": { "description": "Hydraulic-to-plastic multiplier; omit if pressure is already plastic", "type": "number" }, "machineMaxPressure": { "description": "Machine maximum injection pressure, same units as pressure", "type": "number" }, "points": { "items": { "properties": { "fillTime": { "description": "Seconds to fill, first stage only", "type": "number" }, "pressure": { "description": "Peak injection pressure as read on the machine, psi", "type": "number" }, "velocity": { "description": "Injection velocity, in/s", "type": "number" } }, "required": [ "velocity", "pressure" ], "type": "object" }, "maxItems": 100, "minItems": 2, "type": "array" }, "study_code": { "description": "A study as the Lab card encodes it; use instead of the measurements (points, intensificationRatio, machineMaxPressure)", "maxLength": 8000, "minLength": 1, "type": "string" } }, "type": "object" }, "name": "viscosity_curve", "outputSchema": null } ] }
Verify it yourselfcurl -s https://api.teppi.xyz/v1/evidence/sha256:0b398d3f3ddbf309ba95c39125872050be076820b6f272f16efdeff6c3667e77 | sha256sum